Pro-Pump is an effective tool for facility effluent system management. A live bacteria formulation, it offers unmatched performance in keeping drain lines and grease traps open and operating smoothly. Its exceptional performance in low-oxygen (anaerobic) environments results in the rapid breakdown, degradation and removal of difficult fats, oils and grease that otherwise tend to build up and cause clogs.
• Reduces suspended solids to prevent tank clogs
• Eliminates line blockages and the costly downtime that accompanies them
• Reduces pumping frequency, saving maintenance costs
• Eliminates unpleasant odor to improve working conditions
Bio force pink clock is a bacterial grease-digesting additive for lift stations and grease traps.
• Controls grease, sludge, fats and oils to prevent build-ups
• Withstands high temperatures with no loss of effectiveness
• Keeps lift station and grease trap areas odor-free.
• Dissolves slowly, providing continuous treatment over a 30-90 day period, depending on tank size and flow volume
Depends on how big the lift station is. Deeper ones need Vac-Con.
A lift station is a tank (wet well) that waste-water enters, to be lifted to a higher elevation. Lift stations range in size, typically equipped with one or more pumps, a control panel and alarm system. These pumps are used when gravity cannot naturally direct the flow.
Lift stations can have a submersible pump designed to function inside the tank, or an external pump designed to operate outside of the tank. They have sensors (floats) that trigger a pump to turn on or off when the water reaches a certain level.
An alarm will sound to notify operators of a problem. The water level could be too high or too low. There could be a brief, internal failure or simply debris obstructing the sensors from working properly. This is usually what alerts our customers to the need for cleaning and/or maintenance. That’s when they call APS Environmental.
Frequency of service will vary with lift station usage and design. We work with each clients’ specific needs to determine the level of service needed to ensure their system functions properly.
The profound depth of some lift stations can exceed the maximum cubic feet per minute (CFM) range of most vacuum trucks, preventing them from pulling up heavy debris. Our trucks are fully capable of handling 5,000 CFM, while we perform multiple other tasks simultaneously. If necessary, our confined space certified technicians can enter the tank safely to pressure-wash the walls and hydro jet the pipelines.
We also carry Bioforce Pink Block, an additive product that helps break down built-up grease after our service is complete. This can prevent future blockages requiring further lift station cleaning.
If you’ve heard an unwelcome alarm or simply noticed sluggish performance in your lift station, call or email us today. We’ll help determine the most effective maintenance schedule to return your asset to optimal function now, and prevent recurring problems in the future.
Call us today! We will help to determine your maintenance needs.
A lift station is a tank (wet well) with a pump that wastewater enters. It is the point where the waste must be lifted to a higher elevation. Lift stations range in size and are typically equipped with one or more pumps, a control panel and alarm system. They are used when gravity can not naturally direct the flow.
Lift stations can have a submersible pump designed to function inside the tank or an external pump designed to operate outside of the tank. They have sensors (floats) that trigger a function to turn the pump on or off when the water reaches a certain level. An alarm will sound notifying you of a problem. The water level could be too high or too low. There could be a short, internal failure or simply debris obstructing the sensors from working properly.
Frequency of service will vary due to usage and design. We work with our clients specific needs to determine the amount of service needed to ensure the system functions properly. The profound depth of a lift station can exceed the maximum cubic feet per minute (CFM) range of most vacuum trucks which prevent the capabilities of pulling heavy debris. Our trucks are fully capable of handling 5000 CFM while performing multiple tasks to get the job done. Our confined space certified technicians can enter the tank safely to pressure wash the walls and hydro jet the pipelines if necessary.
We also carry a product Bioforce Pink Block that helps break down the grease.
Call us today! We will help to determine your maintenance needs.
Grease traps are mechanical elements of a building’s sanitary sewer system, designed to capture heavy grease and oils from the wastewater stream that flows from the establishment. They prevent these substances from entering and ultimately clogging the municipal collection system. Restaurants, hotels and other food service companies will have and need to maintain at least one grease trap in their systems.
Most commercial kitchens have grease traps that vary in size from 500-10,000 gallon capacity and are located underground, outside the kitchen. Smaller grease traps, usually 25-100 gallons in size, are located inside the kitchen. They’re commonly located under the kitchen sink or in the floor, with an access cover.
Inside a grease trap, grease within the water flow is captured and as it cools, it separates from the water. Smaller grease particles float to the top of the tank, while heavier solids sink to the bottom. Sanitary T-baffles installed near the trap help this process.
As you might imagine, grease builds up over time and regular maintenance of the trap is required for the system to function properly. If grease trap maintenance is neglected, the grease can solidify in the lines. This will ultimately back up the system, causing grease to overflow the top of the tank and run directly into the sewer line. Results?
Don’t neglect your grease trap maintenance when it’s so easy to keep it clean and running well. We specialize in this service, and understand your need to remain online and profitable. We’re happy to design preventive maintenance plans tailored to your specific needs, and perform any necessary minor repairs before they become big problems. Best of all, we can perform the needed services with one call, on a schedule that works for you and your budget. Our technicians provide 24/7 service to avoid disruption of your operation, so there’s no need to wait until your grease trap becomes a problem.
Call today to get your grease traps on a regular maintenance schedule that will save you time, grief and dollars. Don’t forget to ask about our multiple-site discounts!
APS Environmental, Inc. is equipped with efficient and environmentally safe high-pressure water jetting rigs, used to scour and remove buildup of
from all types of drain lines and surfaces. Businesses and organizations in any category – commercial, industrial, municipal, institutional – and even residential property owners and managers can find themselves in need of professional jetter cleaning.
When used as a part of your regular maintenance program, this service can assist in keeping your waste and storm water conveyance systems and equipment functioning properly with less down time. By preventing premature wear on parts, it can extend the life of your systems elements, and help prevent the need for emergency calls. Removal of heavy substance buildup returns your water pipes to their designed volume capacity, increasing efficiency and productivity.
We specialize in pipeline cleaning using Hydro Jet systems operating at 4,000 psi on pipes up to 42 inches in diameter. These high-pressure blasts of water can break through the toughest blockages, and remove years of built-up debris. Jetters can get the job done faster than a mechanical flail or foaming agents, returning your system to optimal operation quickly and with less down time.